
- Download LogicSniffer software from http://www.lxtreme.nl/ols/
- Copy ols.profile-logicboost.cfg.txt and ols.profile-logicboost-internal.cfg.txt to 
   the ols plugins directory. Remove the .txt extension.
- The lowest bit rate in the OLS software is 19,200. This is OK because the launchpad
   application UART ignores invalid bit rates so it will run at 9,600.
   
- There is a test output on P1.6. Connect it to one or more inputs for testing.
- You can also use another launchpad to generate test signals...
   P2DIR = 0x3F; for(;;) ++P2OUT; // Test signals on P2.0 to P2.5
   
- A sample size of 384 or 512 will capture to internal MSP430G2553 RAM - no SPI RAM
   required. If the sample size is 512, it will be padded with zeros.
   
   
--- To use with original SUMP client, or other clients without specific support for LogicBooster ---
- Sample size *must* be 512, tail will be padded with 0
- Internal buffer will be used, SPI RAM buffer currently not supported
- Sample rates map like this:
  2 MHz -> 2 MHz
  1 MHz -> 1 MHz
500 kHZ -> 500 kHz
200 kHz -> 250 kHz
100 kHz -> 125 kHz
 50 kHz -> 62.5 kHz
 20 kHz -> 31.25 kHz
 10 kHz -> 15.625 kHz	
   